Tin Powder production line
- ATOMIZING PART
- Secondary furnace (1 set)
Material: SS 304
- Vibration Feeder(1 piece)
- Atomizing chamber ( 1set)
- Atomizing PLC system (including control cabinet)
- Vacuum pumping system (1 set)
- Vacuum feeding system (1 set)
- Q2 content control system(1 set)
- Powder storage tank (2 pieces)
- SIEVING PART
- Ultrasonic control cabinet (2 pieces) for sieving use(two decks)
- Atomizing yield：25kg/hr（for T3,T4 powder）
- Final powder rate: 60-65%
- Sieving yield： 55-60%（for T3,T4 powder）
- Commissioning material：SAC0307
- Machine dim.：￠1.0mX2m
- Atomizing Machine weight：1000kg
- Separator Machine weight: 500kg
- Easy operation with high stability.
- High atomizing yield (adopt Ultrasonic mode).
- High Sieving yield (adopt imported ultrasonic system and
- Seal design to keep the powder out from leakage. Low oxygen
- Operator required to wear all safety gears, such as the eyepatch,
clothes, gauze mask gloves and dustproof work .
- Make sure all the devices in the atomizing machine are power off
and oxigen reach to standard content before working. And exhaust
equipment is required on working during the working period.
Machine quality and Supplier Responsibility
- Machine quality up to International Industrial Standard. J – STD -
- Capacity and pass rate
- Total atomizing capacity: 25 kg /hr (for T3.T4powder)
- The above content detection is according to Malvern Laser Particle
Size Analyzer or Sieving Test ( PSD ). It can be identified as
qualified by passing one of the two.
- We provide technical training to enable customer can complete
- We offer one year free maintainence under normal operation except
- Nitrogen required
- Install atomizing chamber and sieving machine support
bracket.Crane, lifting equipment，fork-lift truck etc.
- Utility such as water, electricity, compressed air and installation